If you have a problem with traction rolls while running on foam tires, here's a quick and cheap solution. Run a bead of medium CA around...
The hex-shape depressions on the Losi Triple-X4's rims are pretty shallow. Although the design works well, if your wheel nut loosens slightly, the hex shape in...
The excess material produced when tires are molded is called 'flashing.' The inside bead usually has a thin film of it that can get in the...
The XR10 is a totally new design loaded with competition-ready features and is most notably a motor-on-axle design. Axial is clearly looking to be the number-one...
The plastic band used in the RC18T's servo-saver becomes worn quickly, and that leads to slop and poor centering ability. Reinforce the band with a coil...
1280×960
1280×960
If the oil-filled shocks on your Losi Mini-T leak all the time, seal the shock bottoms with silicone glue. Fill the shock bodies until the oil...
This is a great tip for T-Maxx drivers who break a lot of rear turnbuckles. Slide 2-inch pieces of fuel line over the ends of the...
To make sure you don't mix up the hardware when you take your car or truck apart for maintenance, put the screws back in the parts...
High-density foam works great for lining your toolbox drawers. The lining will protect your tools, parts, or whatever else you keep in your toolbox during transportation....
To remove the dirt and oil from between the fins of your nitro engine's cooling head, squirt nitro wash onto a pipe cleaner and feed it...