I found it hard to access the low-speed needle on the Traxxas Revo because the molded roll bar is in the way. Grind a small notch...
Joseph GalloBrooklyn, NYEmpty wire spools make excellent car stands. Ask an electrician to give you empty spools that he doesn't need. Joe says he uses several...
You'll have an easier time installing roll pins if you first crimp one end so it can be partially inserted. That way, it won't pop off...
When you?re rebuilding your diff, it is easy to lose those tiny diff balls while you?re cleaning them. To prevent this, place them in a paper...
Don't toss your old motor can when you get a new motor. Instead, throw it into your pit box. Use it to magnetize your screwdrivers and...
A 12-gallon plastic crate is perfect for storing tires, charging equipment, tools and even cars. The type with a hinged lid is best; it always stays...
The vent holes drilled into most monster truck rims are too small, so they don't allow the air to vent out fast enough when the vehicle...
Neatness counts Instead of using nylon zip-ties that have to be cut and replaced when you need to do maintenance, use the plastic bindings that...
If you race your Revo using a personal transponder and have installed the forward-only drive kit, you can mount your transponder where the OptiDrive unit used...
Electric jewelry cleaners are great for cleaning small parts such as bearings and clutch components. The vibrating action works well to remove dirt and built-up gunk....
If the fuel line on your nitro vehicle keeps slipping off the fuel-tank pick-up, double up the end of the fuel line. Slide a 3mm length...
Run rubber grommets on your nitro vehicle's servos. They will reduce the likelihood of damage to the case ears, they'll decrease vibration, and they'll also help...