If your glow-plug wrench doesn?t hold the plug tightly enough to place it in deep cooling heads, try this: coat an old plug with grease or...
Ever had a sinking feeling that you left your soldering iron or power supply on in the workshop? Increase the safety of your shop by plugging...
Test Drive: O’Donnell Z01-T Made for the track, this high-end race Truggy was made with the best of components and design elements in mind. Steve O’Donnell’s...
The antenna leads on most 75MHz receivers are longer than the antenna tubes that are provided with most RTRs. Extra wire sticking out of the antenna...
O’DONNELL RACING is a relatively recent contender in the ?-scale off-road market. Following the Z01-B buggy, O’Donnell has now released the highly anticipated truggy version, the...
THE CASTER RACING FUSION EX-1 gets credit for being the first ready-to-run electric ?-scale buggy. While the Caster Racing name may not be familiar to you,...
Some screws must be installed in places on your RC model that are hard to reach. To make wrenching easier, rub the tip of the screwdriver...
If you lose the plastic or metal shock bushing in the shock cap, substitute a 3mm slice of fuel tubing.
When installing large decals, use the decal's paper backing as a handle, as shown. You can also use the backing to burnish the decal after you've...
1280×960
1280×960
1280×960